Vulcan-hart ICM24 ML-52470 User Manual download pdf (Page 3)

– 3 –

Installation, Operation, and Care of

MODELS ICM24, ICM36, ICM48, ICM60 & ICM72

GAS INFRARED CHEESE MELTERS

KEEP THIS MANUAL FOR FUTURE USE

GENERAL

The Vulcan Gas Infrared Cheese Melters use efficient gas heat and are available in 24, 36, 48, 60, or

72 inch widths. Each model has one or two burners; each burner has its own pilot light and control knob.

GAS RATINGS

Model ICM24 ICM36 ICM48 ICM60 ICM72

BTU Rating 20,000 BTU/hr 30,000 BTU/hr 40,000 BTU/hr 50,000 BTU/hr 60,000 BTU/hr

INSTALLATION

UNPACKING

Immediately after unpacking, check for possible shipping damage. If the Cheese Melter is found to be

damaged, save the packaging material and contact the carrier within 15 days of delivery.

Before installing, verify that the gas (natural or propane) agrees with the specifications on the rating

plate located on the front.

LOCATION

The area around the appliance must be kept free and clear from combustibles. The area in front of and

above the Cheese Melter must be clear to avoid any obstruction to the flow of combustion and

ventilation air. Means must be provided for adequate air supply and adequate clearance for air

openings into the combustion chamber.

Adequate clearance must be provided in front and at the sides of the appliance for servicing and proper

operation.

The Cheese Melter can be installed in combustible or noncombustible locations. Clearance from

combustible construction must be a minimum of 6 inches from the sides and 0 inches from the back.

There are no minimum clearances from noncombustible construction.

The Cheese Melter can be installed on a noncombustible counter, with or without 4" legs, or mounted

on a combustible or noncombustible wall: Leg kits and wall mounting brackets are available from your

Vulcan-Authorized Service Office for your model Cheese Melter. If installing the Cheese Melter on a

combustible counter, the 4" legs are required.

1 2 3 4 5 6 7 8

No comments

Vulcan-hart ICM24 ML-52470 User Manual Page 3