Vulcan-hart VHA9 ML-138072 User Manual download pdf (Page 13)

V SERIES FOOD HOLDING, TRANSPORT, AND BANQUET CARTS F-41141 (11-09)

ON / OFF SWITCH

VHFA9, VHFA18

1. Remove the cover.

2. Refer to the wiring diagram to

identify the electrical leads that

connect to the switch.

3. Disconnect the wire leads to the

switch.

4. Depress the top/bottom mounted

retaining clips on the switch

housing and remove it from the

front of the control panel.

NOTE: To expedite removal –

cutting the retaining clips off with

a knife or snips will make removal

of the switch easier. (The switch

will not be reusable if this is

done.)

5. Install the replacement switch by

pushing it into the control panel

opening and the retaining clips

snap into place.

6. Complete the installation by

reversing the above steps.

7. Reconnect the cabinet to its

power source and test.

ELEMENT

1. Open the door to the cabinet.

2. Remove the bottom mounted

element cover.

3. Remove the two (2) retaining

screws that hold each element

to the mounting plate and the one

(1) screw for the element clip.

(Fig. 18)

MOUNTING PLATE RETAINING SCREWS

ELEMENT CLIP SCREWS Fig. 18

4. Gently pull the element away

from the inner liner of the cabinet

until the electrical lead wires are

exposed. (Fig. 19 & 20)

Fig. 19

5. Disconnect the element wires at

the electrical lead connectors.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Vulcan-hart VHA9 ML-138072 User Manual Page 13

Comments to this Manuals

Related products and manuals for Water Heaters Vulcan-hart VHA9 ML-138072