Vulcan-hart C24EA3 480V BASIC User Manual download pdf (Page 33)

MODEL C24EA - SWITCHES, BUZZER AND SOLENOIDS

F25213 (May 2006)Page 33 of 52

A. Install valve with the inlet (ON) side of

valve connected to the back panel port and

the outlet (OFF) side of valve connected to

the water level control plumbing. Apply

liquid thread sealant to threads of piping

before assembly.

BUZZER

WARNING: DISCONNECT THE

ELECTRICAL POWER TO THE

MACHINE AND FOLLOW LOCKOUT /

TAGOUT PROCEDURES.

1. Remove the RIGHT SIDE PANEL.

2. Locate the buzzer which is mounted above the

door switch near the front of steamer.

3. Disconnect electrical wiring from the buzzer and

door switch.

4. Remove door striker.

5. Remove remaining hardware securing door

switch mounting bracket to front panel then

remove door switch mounting bracket, door

switch and buzzer as an assembly.

6. Remove buzzer from door switch mounting

bracket.

7. Reassemble parts removed in reverse order.

Perform DOOR LATCH ADJUSTMENT as

outlined under DOOR.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

No comments

Vulcan-hart C24EA3 480V BASIC User Manual Page 33